BactoScan™ 5
Building on the legacy of previous generations, BactoScan™ 5 enables you to analyze raw milk more efficiently and with an unprecedented level of safety, making it easier than ever before to improve food safety and ensure milk quality. Safe and efficient milk bacteria analyzer at a low cost of ownership, enabled by improved operational efficiency, reduced operator steps and less handling of reagents.
Where can you analyse
In the laboratory
What can you analyse
Raw milk from cow, goat, sheep and buffalo milk
Parameters
Individual Bacteria Count (IBC/mL)
Analysis time
9 minutes
Principle
Flow cytometry
MilkoScan™ FT3
The MilkoScan™ FT3 offers a new, intelligent approach to dairy analysis including the power to test a wide variety of liquid and semi-solid dairy products with exceptional uptime and unprecedented consistency of results.
Where can you analyse
In the laboratory or at-line
What can you analyse
Compositional analysis of liquid and semi-solid dairy products such as milk, cream, whey, yoghurt, creme fraiche, protein concentrates including WPC, chocolate milk and more.
Parameters
Global calibrations: Fat, protein, lactose incl. low lactose products, total solids, solids non fat, freezing point, titratable acidity, density, free fatty acids, citric acids, casein, urea, sucrose, glucose, fructose, galactose and fatty acid profiling. Targeted and untargeted adulteration screening.
Analysis time
30 seconds
Principle
FTIR
BacSomatic™
The BacSomatic™ provides rapid hygiene testing of raw milk. It is the first-ever integrated bacteria and somatic cell tester and offers full-automation for minimal reagent handling and consistent test results. BacSomatic™ is ideal for dairies and smaller laboratories needing only a low-volume, yet high-performance analyser.
Where can you analyse
In a laboratory, control room at dairy or on-farm
What can you analyse
Raw cow's milk, buffalo milk and goat milk
Parameters
Bacteria count and somatic cell count
Analysis time
9.5 minutes (1.5 minutes for somatic cell alone)
Principle
Flow cytometry
CombiFoss™ 7
CombiFoss 7 seamlessly integrates MilkoScan™ 7 RM and Fossomatic™ 7 or Fossomatic™ 7 DC to test raw milk for up to 19 parameters including the new differential somatic cell count. FDA/NCIMS and MicroVal (EURL) approved. Cecalait approvals pending.
Where can you analyse
In the laboratory
What can you analyse
Raw milk (cow, goat, sheep, buffalo)
Parameters
Fat, protein (true and crude), casein, lactose, solids (SnF and TS), urea, citric acid, fatty acid profiling, FFA, freezing point depression, PH, ketosis screening (BHB and acetone), untargeted raw milk screening (adulteration), total somatic cell count (SCC) and differential somatic cell count (DSCC)
Analysis time
6-36 seconds depending on capacity level
Principle
FTIR and flow cytometry
Fossomatic™ 7
Based on proven FOSS technology, the Fossomatic™ 7 counts somatic cells in raw milk in seconds. Rapid somatic cell count allows farmers to take fast action on early signs of mastitis and secure high quality milk. FDA/NCIMS and MicroVal approved.
Where can you analyse
In the laboratory
What can you analyse
Raw milk (cow, goat, sheep, buffalo)
Parameters
Somatic cell count (SCC)
Analysis time
6-36 seconds depending on capacity level
Principle
Flow cytometry
MilkoScan™ 7 RM
The MilkoScan™ 7 RM is a high capacity, fully automatic solution for milk composition analysis for payment and dairy herd improvement. MilkoScan™ 7 RM is available as a part of CombiFoss™ 7.
Where can you analyse
In the laboratory
What can you analyse
Raw milk (cow, goat, sheep, buffalo)
Parameters
Fat, protein (true and crude), casein, lactose, solids (SnF and TS), urea, citric acid, fatty acid profiling, FFA, freezing point depression, pH, ketosis screening (BHB and acetone) and untargeted raw milk screening (adulteration screening)
Analysis time
6-36 seconds depending on capacity level
Principle
FTIR
BactoScan™ FC+
Based on the measurement of Individual Bacteria Count (IBC), BactoScan™ FC+ gives an accurate determination of the hygienic quality of raw milk with a capacity of testing up to 200 samples per hour. FDA/NCIMS and MicroVal (EURL) accepted method.
Where can you analyse
In the laboratory
What can you analyse
Raw milk (cow, goat, sheep, buffalo)
Parameters
Individual Bacteria Count (IBC)
Analysis time
9 min
Principle
Flow cytometry
4250 Single-Sample Cryoscope
The high-performance reference method for determining the freezing point of milk.
- Trusted results in just 90 seconds!
- Low maintenance
- proven robustness & reliability
- Supports compliance with regulatory standards
Assured Monitoring of Milk Supply Process and Product Integrity
The Model 4250 Single-Sample Cryoscope allows your plant to manage a premium milk supply, ensure quality products and improve your operating efficiency. The system is the fastest, most reliable, and precise system for milk analysis and it utilizes the industry preferred freezing point depression (FPD) method for determination of added water to milk.
Designed for reliable monitoring of added water in milk
The Model 4250 Cryoscope is designed to sense sample temperature by using high precision thermistors. It then controls the degree of super-cooling and freeze induction, and measures the freezing point of the sample in just two minutes.
For Dairy Labs
- Determination of added water in raw cow*, sheep, goat, buffalo and camel milks.
- Checkpoint indicator for sour or contaminated raw milk.
- Can indicate the presence of water in milking machine pipes, undrained bulk tanks, and other types of water dilution at the milk producer’s site.*Able to determine added water in pasteurized, UHT-treated, and sterilized whole or partially skimmed cow milk.
Product Features
Versatile
- International Reference Method of Plateau Seeking (ISO/FDIS-5764/IDF 108)
- Standard timed plateau methods
- Millidegrees Celsius (m°C) and millidegrees Horvett (m°H)
Robust
- Low maintenance; the sample probe and stir-wire are fully accessible for easy cleaning
Data handling
- Optional barcode scanner for supplier ID numbers
- On-board printer for better traceability, tracking- meet HACCP requirements
- RS-232 communication capability for data transfer
Customize user experience
- Multiple language display settings
Ease of use
- Rapid and stable automated calibration procedure
- Two minute test time
- High throughput of samples
Cryoline standards
- Advanced Instruments calibrators, controls and supplies meet the exacting standard required to fulfill ISO, HACCP and QA/QC laboratories
Pages /